TW Deck Cleaner is intended for use on all soft and hardwood decks, fences, patios and other wood installations. Always wear proper protective equipment when using, mixing, applying, or otherwise handling this product. Always do a test spot with this product in an out of the way area prior to full application.
-Thoroughly wet the surface to be treated prior to application.
-Mix 4-8 ounces of TW Deck Cleaner per gallon of water. Apply using a sprayer, brush, or applicator and always from the bottom up on vertical surfaces.
-Allow 5-25 minutes for solution to dwell; some light scrubbing may be required on very dirty surfaces. Keep the solution wet by misting it lightly with water if it begins to dry out. Always work in small sections to prevent product from drying.
-When rinsing, use the lowest pressure possible to achieve the desired results. Normally a 25-degree meg nozzle (j-rod) will be sufficient. On very dirty surfaces, a white tip may be required.
-Clean in a uniform manner across the entire length of the board, keeping a consistent distance across the entire surface. If stopping and starting is unavoidable, start and stop in a sweeping motion, feathering away from the surface gradually.
Use solution within 24 hours of mixing. do not allow solution to dry on any surfaces. After thoroughly rinsing, use TW Deck Bright to achieve the best results.
