Skip to product information
1 of 1

TW Deck Cleaner - 100% Sodium Metasilicate

TW Deck Cleaner - 100% Sodium Metasilicate

TW Deck Cleaner - 100% Sodium Metasilicate is the superior choice for wood restoration and cleaning. 

Unlike Sodium Hypochlorite, Sodium Metasilicate is not as reactive and can penetrate deep into wood surfaces to lift out organic growth, dirt, and grime. 

Sodium Metasilicate will not bleach out the deck surface when used properly, leaving a clean, natural looking surface.

TW Deck Cleaner can act as a stripper on some oil stains and will work to remove mill glaze and mill stamps from dimensional lumber.

We highly recommend using TW Deck Bright to brighten and neutralize the surface after cleaning.

* 50 pound containers ship hazmat and are only available through ground shipping.


2 total reviews

Regular price $38.00
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.

Triple Wide Restoration Products


  • TW Deck Cleaner is intended for use on all soft and hardwood decks, fences, patios and other wood installations. Always wear proper protective equipment when using, mixing, applying, or otherwise handling this product. Always do a test spot with this product in an out of the way area prior to full application.

-Thoroughly wet the surface to be treated prior to application.

-Mix 4-8 ounces of TW Deck Cleaner per gallon of water.

-Apply using a sprayer, brush, or applicator and always from the bottom up on vertical surfaces.

-Allow 5-25 minutes for solution to dwell; some light scrubbing may be required on very dirty surfaces. Keep the solution wet by misting it lightly with water if it begins to dry out.

-Always work in small sections to prevent product from drying.

-When rinsing, use the lowest pressure possible to achieve the desired results. Normally a 25-degree meg nozzle (j-rod) will be sufficient. On very dirty surfaces, a white tip may be required.

-Clean in a uniform manner across the entire length of the board, keeping a consistent distance across the entire surface. If stopping and starting is unavoidable, start and stop in a sweeping motion, feathering away from the surface gradually.

  • Use solution within 24 hours of mixing. do not allow solution to dry on any surfaces. After thoroughly rinsing, use TW Deck Bright to achieve the best results.

Safety Data Sheet


View full details

Made By Contractors, For Contractors

As exterior cleaning and restoration contractors ourselves, we were looking for affordable solutions to grow our business. We looked around and couldn't find the right products, at the right price, all in one place, so we created it. We work closely with our manufacturing partners to make sure we come up with the best products available on the market, even improving on some you may already know and use.

Check Out Our Full Lineup of Wood Restoration Chemicals

Customer Reviews

Based on 2 reviews
Ryan Little
Sodium Metasilicate

Great product, price & shipping/delivery was super quick! Also, they are located in my wonderful state of NC! Will be using them in the future for all my wood restoration needs.

Bobs Pressure Washing LLC
Good stuff!

Received this Hazmat overnight, because I am in a neighboring state. I have used it and the 23 yr old wood does in fact look like brand new again! It is amazing! I did brighten it with Oxalic acid after cleaning with this Sodium metasilicate. Combined they worked a treat. Wet, let soak in for ~10 minutes, apply S. metasilicate (1cup/gal), allow to dwell for ~30 minutes, pressure rinse with 25 degree tip, followed by lower pressure rinse, applied Oxalic acid (1.25 cup/gal), let dwell for ~10 minutes, rinse, rinse, then rinse again. It should turn that beautiful golden that you see online, then the brand new looking "Blonde" once it's completely dry.

I have delivery issues and Phillip understood and arranged things to suit my delivery needs.

I do recommend and fully expect to be a return customer!